Specifications

Mono Amplifier 1 -8 Ohm Stable

Working Voltage 9 - 16VDC

​

Minimum Output @14.4 Volts

​

CA 8 Ohm - - 50 Watts RMS @ 0.0020% THD

A - - 55 W RMS @ 0.1% THD

​

CA 4 Ohm - - 30 Watts RMS @ 0.0020% THD

A/B - - 90W RMS @ 0.1% THD

​

CA 2 Ohm - - 10 Watts RMS @ 0.0030% THD

A/B - - 150W RMS @ 0.1% THD

​

CA 1 Ohm - - 2 Watts RMS @ 0.0050% THD

A/B - - 160W RMS @ 0.1% THD

​

Signal to noise ratio A/W   Full Power (Op Amp pass through)   > -118dB

​

Signal to noise ratio A/W   Full Power   > -102dB

​

Frequency Response 12Hz-100KHz (-1db)

​

Input impedance 33K Ohms

Input sensitivity (Op Amp bypass switch on)   0.1V - 1V

Input sensitivity   0.3V - 8V

Alps Gain control   +15dB

Phase Switch 0 - 180 Deg

 Idle current   + - 9 Amps

Thermal cut out (3 x internal variable speed fans)   80 degrees celsius

Internal fuse rating   2 x 15 Amps

DC protection cut off   > 9.00Hz

Dimensions   (H) 64mm x (W) 378mm x (D) 339mm

Weight 7.2kg