top of page

ASPIRE PRO DST V2

ASPIRE PRO DST V2

Specifications

Stereo Amplifier 4 - 8 Ohm stable

Voltage input 9V - 16V DC

Minimum output at 4 Ohm loads @ 14.4 Volts

2 x 100 w RMS @  -  0.01% THD

2 x 240 W RMS @. -  0.1% THD

Minimum output at 8 Ohm loads @ 14.4 Volts

2 x 100 W RMS @  -  0.01% THD

2 x 160 W RMS @  -  0.1% THD

Bridge

1 x 550 W RMS @ 6 - 8Ohm load only  -  0.1% THD

Signal to noise ratio A/W  -  Full Power  -  >-100dB

Frequency response 12Hz-100KHz (-1dB)

Input impedance  -  33K Ohms

Input sensitivity  -  0.3V - 8V

Idle current  -  + -3.0 Amps

Thermal cut out  -  80 Deg C

Internal fuse rating  -  2 x 30 Amps

DC protection cut off  -  > 9.00 Hz

Dimensions

(H) 64mm x (W) 378mm x (D) 339mm

DST MODEL: (H) 64mm x (W) 730mm x (D) 339mm

Weight

With Aluminium Lid 7.85kg / With Stainless Lid 8.24kg

DST MODEL: 16.5kg

Audio Wave Ltd reserves the right to change or modify its products without notice.

Aspire Pro DST V2 Specs
bottom of page